Flexible brick / Flexible clinker
The optimal technical solution
for facade thermal insulation systems for their cladding:
- Reduced construction costs
- Reduced installation time
- Premium-look façade with a natural clinker finish
- Guaranteed durability
- Compliance with building codes
You’ll get all this with the “KLINKER PLUS” kit, which consists of two components: flexible clinker and adhesive-grout.
Today, it’s the best choice for facade finishing, where layers are bonded using adhesive mortars:
This system is considered the most effective and economical, its cost is half that of the “ventilated facade” system.
Thanks to its technical characteristics, the “Klinker Plus” kit allows for clinker-like cladding of buildings of any height. The flexible tiles’ low weight (3-5 kg/m²) and high vapor permeability allow them to be bonded to any type of surface, including mineral wool insulation.
Flexible clinker installation requires no special skills or tools. There’s no need to hire highly qualified specialists for the installation.
The convenience of using the “Clinker Plus” material set has been appreciated by companies in Ukraine and abroad. The product quality and high demand are confirmed by the number of completed projects for developers.
Our flexible tiles have all the hallmarks of a premium product, we’ve created analogues of global clinker tile brands. We’ve included the best flexible brick/flexible clinker designs in our 2026 tile collection catalog. And our prices will pleasantly surprise you.
DESCRIPTION OF THE MATERIALS INCLUDED IN THE “CLINKER PLUS” KIT AND THEIR APPLICATION
The Klinker Plus kit is delivered as a set of components made up of materials and accessories according to the order specifications. The Klinker Plus kit consists of a decorative finishing material (flexible tiles), an auxiliary material (repair mortar), and an adhesive mixture (grout adhesive).
“Component No. 1 – Flexible Tile” is a decorative finishing material that is a mandatory component of the “Klinker Plus” kit. These small-piece tiles are a flexible, lightweight, and vapor-permeable material used in industrial and civil construction for new buildings and renovations:
1. For interior wall decoration, except for bathrooms, kitchens (backsplashes), fireplaces, and fireplaces. For bathroom and kitchen walls, choose tiles with a smooth surface that are resistant to chemicals according to the AA (AB, AC, AD), PEI I-II resistance ratings. Fire-resistant tiles with a “T” (thermal resistance) rating are required for finishing fireplaces and stoves.
2. For exterior cladding of structures with façade thermal insulation (structural class A3).
3. For finishing enclosing structures used to protect, highlight, frame an area, or connect buildings into a single architectural ensemble, such as walls, fences, wattle fences, hedges, and other similar structures made of concrete, aerated concrete, foam concrete, brick, or stone.
Flexible brick/flexible clinker is certified in accordance with Ukrainian building standards.
Appearance:
Flexible clinker tiles / Flexible bricks have the appearance of natural clinker tiles. The surface of the flexible tiles is matte and slightly textured. These handcrafted tiles are painted on the inside, and each tile has its own unique design. The manufacturer’s catalog lists tiles by color, pattern, texture, and format. The appearance of the flexible tiles is approved in the design documentation for the prefabricated system, in accordance with the ordered tile samples displayed at the customer’s stand or on the façade.
Depending on the format, the thickness of the flexible tiles varies from 2-4 mm to 4-6 mm. They weigh 3-5 kg/m², so finishing with flexible tiles can be comparable to finishing with lightweight plaster, where the thermal insulation is reinforced with a protective layer with a recessed fiberglass mesh.
Technical specifications:
– Water absorption coefficient – 0.06 kg/m² per hour
– Vapor permeability – 0.01 µ, mg/m*h*Pa
– Flammability class – G1 or NG (two material types are available)
– Tensile strength – 13.8 MPa
– Frost resistance – from 75 cycles
– Weather resistance – 25 years
Flexible tile composition: quartz sand, iron-oxidizing pigments, polymer composite. Some products are sprinkled with marble chips and reflective glass spheres.
“Component No. 2 – Repair Mixture” is an auxiliary material for flexible tiles, ordered in the “Klinker Plus” kit as needed:
– Finishing house corners – this is a mandatory component, sealing the joints of corner elements or the ends of flexible tiles where they come into contact with other finishing materials.
– Repairing/restoring flexible tiles – this is a mandatory component, covering up dirty and damaged areas on the flexible tiles.
The repair mix has the same composition as the flexible tiles: quartz sand, iron-oxidizing pigments, and a polymer composition. The repair mix is flexible tiles in a liquid (not dried) state. The color of the repair mix after drying matches the selected color (or color combination) of the flexible tiles, according to their nomenclature in the manufacturer’s catalog.
Packaging: 1 to 20 kg in plastic buckets.
“Component No. 3 – Adhesive-grout“ is a dry, hydrophobic, colored adhesive mixture, PB-186. It combines flexible tile adhesive and joint filler in a single application. Component No. 3 is a required component of the “Klinker Plus” kit.
The colored adhesive mixture, PB-186, is used on rigid horizontal and vertical substrates (concrete, cement, cement-lime mortar, brick, etc.), as well as on drywall, fiberboard, aquapanels, and other materials. The adhesive mixture has highly hydrophobic properties, making it recommended for surfaces exposed to constant weather conditions: building facades, balconies, terraces, basements, etc.
PB-186 adhesive-grout has strong adhesion to the substrate. Thanks to its elasticity and thixotropy, PB-186 adhesive-grout is easily applied to the surface without spreading.
TECHNICAL DATA
|
Composition |
a mixture of cement with mineral aggregates, polymer modifiers and color pigments |
|
Appearance |
homogeneous loose mass without foreign impurities |
|
Color |
white, gray, slate gray, graphite (according to the marking on the package) |
|
Filler size |
no more than 0.63 mm |
|
Mixing proportions |
4.4-4.8 l of water per 20 kg of mixture (0.23+-0.01 l of water per 1 kg of dry mixture) |
|
Displacement of the material being fixed (for walls only) |
no more than 0.5 mm |
|
Application temperature of the mortar mixture |
from +5 to +30 ֯С |
|
Shelf life from the start of mixing |
not less than 120 hvilin |
|
Time in the open |
not less than 30 hvilin |
|
The period of time during which adjustments can be made |
not less than 10 hvilin |
Bonding strength with the base:
|
– in air-dry conditions (after 28 days) |
не менше 1,2 Мпа; |
|
– after soaking in water |
не менше 1,0 Мпа; |
|
– after alternating freezing and thawing, 50 cycles |
не менше 1,0 Мпа; |
|
– after temperature exposure (+70 °C) |
не менше 1,0 МПа |
|
Time of possible technological movement |
не раніше 24 годин |
|
Operating temperature of hardened mortar |
від -30 до +70°С |
Replacement of components included in the Klinker Plus kit and provided for in the work execution project is permitted only with the agreement of the design organization, the customer and the manufacturers of the materials of the Klinker Plus kit.
The materials included in the “Clinker Plus” kit are certified in accordance with Ukrainian building codes.
In the FAQ – video section you can get answers to your questions about flexible bricks/flexible clinker.
For information on how to lay flexible brick/flexible clinker, see the Installation Instructions section.
HOW TO GET SAMPLES OF FLEXIBLE BRICKS
You can view samples of flexible brick/flexible clinker and adhesive-grout at the manufacturer’s office or visit our dealers at the addresses listed in the “CONTACTS” section.
INDIVIDUAL DEVELOPMENTS
The manufacturer develops custom tile samples based on the original bricks provided. Sometimes, the manufacturer may consider creating new tile samples from photographs, provided the primary colors are listed using the NCS catalog number. Please note that the color number in the online catalog may not match the actual color due to monitor settings. Our technologist uses only the original NCS catalog.
The manufacturer receives a €100 deposit for developing samples. This deposit will be included in the purchase price when placing an order, and the price of the custom tile will be the same as the standard price. The minimum order quantity for custom designs is 500 m².
HOW TO APPLY
To place an order, use the type of communication convenient for you: phone, Viber, WhatsApp, Telegram. You can also send a request by email or fill out an electronic form and our managers will contact you. We will need the following information: the type of surface and area of the object for applying the material, the number of linear meters for finishing corners and window slopes, the assortment of tiles you like.
PROCEDURE FOR PLACING AND EXECUTING AN ORDER
To issue an invoice and sign the Agreement, you must provide legal entity documents (Certificate of Registration of Legal Entity and Tax Certificate, details).
After electronically signing the documents, the buyer makes an advance payment of at least 70% of the order amount and places the production order. Production time is 7-22 days, depending on the order volume and production capacity.
The remaining payment for the Goods will be transferred to the Seller’s account within 3 days of the products being ready in the warehouse in accordance with the Specifications, in accordance with FCA terms (according to Incoterms 2020).
Delivery is carried out by road at the buyer’s expense.
Documents are exchanged electronically; originals are provided upon delivery.
Each batch of Goods must be accompanied by the following set of documents in English:
– Invoice;
– International CMR consignment note;
– Manufacturer’s product quality certificate; – Copy of the installation flow diagram.
– Copy of the certificate of conformity with technical requirements;
— A copy of the SES report.
At the buyer’s request, the seller will provide a Euro-1 certificate.